Shimadzu MOC63U halogen moisture tester

Simple operation mode and keyboard design, automatic heating mode, saving measurement time

Classification:

Moisture meter

Email:

xytp888@126.com

Related Products

Detailed introduction

Easy operation - Automatic start mode

Simple operation mode and keyboard design, automatic heating mode, saving measurement time

Compact design with backlit LCD display

In the electronic moisture meter, MOC63u is one of the most compact products, it is only 202(mm) long.

Data management — — Windows Passthrough Windows

Measurement conditions and data can be stored in MOC63u. There are DATA IO interfaces for connecting printers, RE232C and USB interfaces for connecting PCS. Data can be transferred directly to EXCEL and other Windows applications.

Large weighing tray

Sample disk size: diameter 95mm

Halogen lamp heating

Halogen lamp heating, giving you fast and accurate measurements.

Maintenance

For halogen lamp cleaning and replacement, it is still very simple.

MOC63u Test method

Please select the correct measurement method

♦ Stop mode

Automatic stop mode

When the change of moisture in 30 seconds reaches below the automatic stop condition of the calibration, the heating will be automatically stopped and the measurement will end.

Timing stop mode

When the preset time is reached, the heating is automatically stopped and the measurement ends.

♦ Interval drying method

Rapid drying method

At the beginning of the measurement, high temperature is first used for heating, and then the calibrated temperature is reheated to shorten the heating time.

Slow drying method

The sample is heated by slowly increasing the drying temperature according to the usual determination.

Step drying method

In dry conditions, the heating conditions can be set in multiple steps. This is a very good method for measuring samples that contain a lot of water.

♦ Starting mode

When the upper cover is closed, it will be heated immediately and measured. This will save time in repeated measurements.

Technical parameters

Range	MAX	60g
	MIN	0.02 g
Minimum display value		0.001g 0.01%/0.1%(optional)
Repeatability		0.15%(2g) 0.05%(5g) 0.02% (10 g)
Heating source		Halogen lamp heating
Power		400W
Temperature setting range		50-200℃ (step 1℃)
Display		LCD backlight display
Scale size		Diameter 95mm
Host size		202× 336× 157
Host weight		4kg
Working temperature and humidity range		5-40℃, below 85%RH
Method of measurement		Standard mode, fast drying, slow drying, stage drying
Determination time		1-120 minutes (Max. 12 hours)
Interface		RS232C (9 pins), DATA I/O, USB interface
Test condition storage		10
Data storage		100 groups
Temperature calibration element		Optional accessories